How To Fix ONN TV Stuck On Logo Screen?

To fix your ONN Roku TV stuck on the logo screen, power cycle it, and update it to the latest firmware. You can also clean the TV’s internal components, replace the faulty capacitors, or perform a hard reset.

The most common reasons why a TV is stuck on the startup screen are corrupted firmware or overwhelmed internal memory.

So, Generally, updating your TV’s firmware solves the problem but if this doesn’t solve your problem, here are some other steps for you.

1. Power Cycle Your TV

unplug and plug your TV back

To power cycle your ONN Roku TV, unplug your TV from the power cord or source and wait for around 5 minutes. Then, press and hold the Power button on your TV for 30 seconds and plug your TV back into the power outlet.

I know, it might sound daunting to you but it works, especially if your ONN TV is stuck on the Logo screen because of a software glitch or overwhelmed cache.

If by any chance, it didn’t work for you then try updating your TV’s firmware.

Quick Tip- Unplug all the connected devices to your TV including USB drive, gaming console, or other external devices, plugged using HDMI cables.

2. Update the TV’s Firmware

Update the TV’s Firmware

To update your ONN TV’s firmware, navigate to ‘Settings’ and select ‘System’ and check for the available update.

In this case, you will have to update your TV’s software using a USB drive. Here’s the guide on how to update your ONN TV firmware.

ONN Roku TV releases new updates regularly to improve its TV performance and fix minor issues and temporary glitches.

3. Perform a Factory Reset

Perform a Factory Reset

To perform a factory reset on your ONN Roku TV, unplug all the connected devices and power On your TV, then press and hold the reset button (available on the back side of your TV) for 12 seconds.

Your TV will restart after the reset is complete.

You can also look at our guide on how to factory reset your ONN Roku TV.

Remember that performing a reset will delete all the previously saved configurations and saved passwords and you will have to configure everything again.

4. Clean the TV’s Internal Components

Clean TV’s Internal Components

To clean your TV’s internal components, open the back panel using a screwdriver and clean all the TV components using a soft brush.

Over time, dust particles accumulate on the TV’s internal components including internal circuits and cooling parts which can slow down your TV.

Accumulation of dust particles on the power and T-con board can cause overheating on your ONN Roku TV.

Thankfully, you don’t need to be a professional TV repair guy to open the TV’s back panel and clean the internal components. You only need a screwdriver and a soft brush to remove the accumulated dirt.

Quick Tip- Recently, we found that the damaged or burned-out capacitors can also stuck your TV to the loading screen. Let’s check how to find out the burned capacitors and replace them in the next method.

5. Replace Faulty Capacitors

To replace the faulty capacitors, use a heated soldering iron to apply pressure on the back of the capacitor pin on the board and when it melts, remove the damaged or burnt capacitor and replace it with a fresh one.

I won’t recommend you change the TV capacitors yourself unless you are a professional, you better call a TV repair person.

But, if think you can do this yourself, you can go ahead.

Do this before replacing

  1. Check your capacitor rating and buy a new one with the same Voltage, Temperature, and Micro farads ratings. if you can’t find one with the same ratings, get one that has a slightly higher rating than your old capacitor.
  2. Discharge your capacitors, simply turn off your TV and press the power button on your TV for 30 seconds. Don’t open your TV’s back panel until you perform this step.

But, if think you can do this yourself, here’s how you have to do this:

  1. Open your TV’s back panel and find out the damaged capacitor. here are some signs of a damaged one – bulging at the top, leaking or corrosive layer on the capacitor legs.
  2. Find the exact pins your capacitor is attached to.
  3. Remove the pin using a heated soldering iron.
  4. Using your heated soldering iron, apply pressure on the back of the pin until it melts down and you can easily take that out.
  5. Now, put the fresh capacitor exactly in the same way as the old one was placed and sold the pins using the soldering iron.
  6. Now, put the TV back panel as it was and connect it to the power outlet.
  7. Turn on your TV and check if your problem is solved.

Always remember to contact a professional to repair your ONN Roku TV if you don’t have any previous experience of repairing electronic devices.

6. Contact ONN Roku TV Support

Contact ONN Roku TV Support

If you have gone through all the above ONN troubleshooting guide tips provided in this article but still your ONN Roku TV is stuck on the startup screen, the only option you have now is to call ONN customer support.

You can directly call them at 844-334-2355 between 9 am to 9 pm EST or send an email to

ONN Roku TV Frozen-What To Do?

If your ONN Roku TV is frozen, unplug it from the power cable or outlet, wait for a few seconds, and plug the TV back in. This method often fixes a frozen TV.

Generally, ONN Roku TV freezes due to a software problem which can easily be fixed by a simple restart. If this doesn’t bring your TV back to the normal condition, perform power cycling (already explained in this guide).

Also, check for the latest software update available for your TV and update your firmware using a USB drive.

If your TV is still frozen and in under warranty, get in touch with the ONN support for assistance.

Frequently Asked Questions

Can ONN Roku TV stuck on the logo screen due to a faulty HDMI cable?

Yes, ONN Roku TV can stuck on the logo screen due to a damaged or faulty HDMI cable as it will prevent the TV from establishing a perfect connection between the external device and the TV.

Can you get an ONN TV logo screen issue because of a third-party app installation?

You can get an ONN TV logo screen issue because of a third-party app installation as the unofficial software can cause conflicts with the TV’s firmware.

I’ll advise you to use only the official apps available on the App Store.

Why is my Onn Roku TV home screen not loading?

If your ONN TV screen is not loading, you can perform a System Restart or power cycle your TV (as explained in this guide above) and your TV issue will be resolved.


Through this guide, we have provided all the details that you need to fix your ONN ROKU TV stuck on the logo screen, startup screen, or loading screen.

So, if you have used the methods discussed above and solved the problem with your ONN TV, let us know the method that worked for you in the comment section below.

Keshav Krishnan

I am an Engineer and passionate about Smart Homes and Home Improvements and spent years using, designing & working with Smart Home devices. I am on a mission to make Home Automation easy and affordable for everyone.

Recent Posts

Why Is My ONN TV Remote Not Working? Why Is My ONN TV Having Sound Issues? Who Makes ONN Televisions?  Shark Robot Not Connecting To WiFi ONN TV Red Light Blinking